How to Clean and Maintain the Fiber Laser Cutter Head?

Cleaning and maintaining the fiber laser cutter head is a key step to ensure the performance of the laser cutting machine and extend its service life. The following are specific recommendations for cleaning and maintaining the laser cutting head.

1. Regular Inspection

Regularly inspect the fiber laser cutter head: Regularly inspect the laser cutting head as recommended by the equipment manufacturer to observe whether there is damage, deformation or wear.
Inspect the optical components: Regularly inspect the lenses and reflectors to ensure that there is no dust, oil or other contaminants.

2. Clean the Optical Components

Use appropriate tools: Purchase special optical cleaning tools and cleaners, and avoid using materials that will scratch the optical surface, such as paper towels. Microfiber cloths are usually recommended.
Cleaning order:
Shutdown: Before any cleaning, make sure the laser cutting machine is turned off and wait for it to cool down.
Clean the reflector: Soak a microfiber cloth with alcohol or a special optical cleaner and gently wipe the reflector to remove dirt and dust.
Clean the lens: Perform a similar cleaning on the lens, making sure to use appropriate force to avoid damaging the optical surface.
Use an air gun: Before cleaning, use an air gun or compressed air to gently blow away dust and particles on the surface.

3. Check and Replace Consumables

Travel distance: Check the wear of the cutting head and its moving parts. If there is obvious wear, replace them in time.
Replace lenses and reflectors: According to the frequency of use and working conditions, regularly replace the lenses and reflectors of the fiber laser cutter head to avoid affecting the cutting quality.

4. Fiber Laser Cutter Head Lubrication

Lubricate the guide rails: According to the manufacturer's instructions, regularly lubricate the sliding parts or guide rails of the cutting head to ensure smooth movement.
Use the right lubricant: Choose the right type of lubricant and avoid choosing grease that will pollute the optical components.

5. Ensure Good Electrical Connections

Check the cables: Regularly check the cables connected to the fiber laser cutter head to ensure that there is no wear or damage.
Connector cleaning: If there is a poor contact, you can carefully clean the connector to ensure good electrical contact.

6. Ensure a Clean Working Environment

Keep the cutting area clean: Ensure the cleanliness of the area around the laser cutting machine, and try to avoid excessive smoke, dust and debris to reduce pollution to the cutting head.
Arrange ventilation properly: Ensure good ventilation during cutting to reduce the impact of smoke on optical components.

7. Record Maintenance Status

Maintenance log: It is recommended to record the time, content and problems found in each cleaning and maintenance for subsequent reference and analysis.
Regular evaluation: Regularly evaluate the status of the cutting head and formulate the next maintenance time and plan according to the wear and tear.

Summary

Regular cleaning and maintenance can ensure the high efficiency and cutting quality of the fiber laser cutter head, avoid production stagnation due to equipment problems, and save time and cost for the enterprise.

 If you have related needs, please contact us immediately and we will provide you with the best offer!